neck pain and headache – Chiropractic method of neck

neck pain

Figure 2-2-1 a and b neck – holding and head-shaking method

neck pain

neck pain

Figure 2-2-2 a, b neck rotation head method

Rapid neck rotation

[position]Sit upright with slightly forward craning of the head.

[methods]After the doctor stands up, hold the top of the patient's head with one hand and the lower jaw with the other hand, gently shake the head from left to right for 3 ~ 5 times to relax the neck muscles of the patient, and then force both hands in the opposite direction to make the head rotate rapidly to one side, and the sound of playing is often heard (figure 2-2-3a, b).

neck pain

Figure 2-2-3a rapid neck rotation method

neck pain

FIG. 2-2-3b rapid neck rotation method

Four, side clamping method

[position]The patient sits upright and the doctor stands behind him.

[methods]The doctor pressed the root of the neck with one hand and the other hand pressed the top of the head on the opposite side. Both hands pushed the neck side with relative force, gradually increasing the range of motion of the neck side flexion. When it reached a certain range and felt resistance, the doctor pushed the neck side with a little force, and often heard the sound of playing (figure 2-2-4a, b).

neck pain

Figure 2-2-4a side clamping method

neck pain

Figure 2-2-4b – neck lateral manipulation

Double neck rotation

[position]The patient sits upright, the assistant stands on the healthy side in front, and supports the patient's jaw with one palm, and the other hand touches the patient's posterior occiput, and the doctor stands on the affected side behind, and supports the high and tender spinous process with one thumb, and gently supports the neck on the healthy side with the other four fingers, and holds the assistant's lower jaw hand.

[methods]Hold the position, the assistant hands together hard up, pull the healer hands together in patients with head and neck to the flip side, the patients with head and neck above along the sagittal axial rotation about 30 °, the healer top for spine to the contralateral horizontal pushing force of thumb, the noise can be heard of cervical vertebra, at the same time can feel refers to the displacement of the spine to the contralateral (FIG. 2-2-5 a, b).

neck pain

neck pain

Figure 2-2-5 double neck rotation method for a and b

Fixed point neck rotation method

[position]Patients seated, healers who stand behind, the spines of thumb to resist high up and tender or transverse process, the remaining four fingers gently lifted the contralateral neck, on the other hand to make the patients with head and neck forward bends 35 °, 45 ° to the contralateral partial (or patients can tolerate the maximum), the healer prone before the upper part of the body, in patients with chest compressions in the head, to keep the patients with head and neck forward bends, cornering posture.

[methods]The doctor supported the patient's jaw with the palm, and pulled the patient's head and neck outward and upward to the affected side, making the head and neck rotate 45° along the sagittal axis. At the same time, the doctor pushes the thumb against the spinous process or the transverse process hard to the healthy side. At this time, the sound of cervical spine can be heard, and at the same time, the doctor feels the displacement of the spinous process or the transverse process under the finger to the healthy side (figure 2-2-6a, b).

neck pain

Figure 2-2-6a fixed-point neck rotation method

Figure 2-2-6b fixed-point neck rotation method

Seven, pull neck stretch method

[position]The patient sits upright and the doctor stands behind him. The doctor put one hand on the patient's head and the other hand on the affected hand with 2 ~ 5 fingers.

[methods]The doctor pushed and pressed the patient's head to the uninjured side with one hand, and made the patient bend his elbow and stretch his arm with the other hand, exerting force in the opposite direction (figure 2-2-7a and b).

neck pain

FIG. 2-2-7a neck pulling and stretching method

neck pain

FIG. 2-2-7b neck pulling and stretching method

Eight, pressure shoulder rotation neck method

[methods]The doctor presses the shoulder of the patient and fixes the trunk of the patient. The other elbow supports the lower jaw of the patient, and the hand presses the patient's neck, gently pulling upward, and then slowly rotating to the left or right. The movement should be steady and powerful, and the amplitude gradually increases, and the bouncing sound of cervical vertebra can be heard (figure 2-2-8a and b).

neck pain

Figure 2-2-8a shoulder – rotation neck press

neck pain

FIG. 2-2-8b shoulder-turning neck press

Nine, embrace head kick leg method

[position]The patient sits upright and the physician walks parallel to the back.

[methods]The thumb on one hand supports the high and tender spinous process or transverse process, and the elbow on the other side supports the patient's jaw. Hold the patient's head and stick to the shoulder to fix the patient's head and neck forward bend and sideways posture. In this position, the doctor kick up force, the patient's head and neck to the affected side outside the upper; The doctor pushes the thumb of the top against the spinous process or transverse process to the healthy side, at this time, the bouncing sound of cervical vertebra can be heard (figure 2-2-9a, b).

neck pain

neck pain

Figure 2-2-9a and b kicking with head in hand

Ten, supine drafting method

[position]Client in supine position with head out of bed; The physician steps in front of the patient's head, placing his hands on his cheeks and behind his pillow.

[methods]The doctor first pulls the patient's neck and gently shakes it to relax the neck muscles. Under the maintenance of the traction, both hands gradually force the patient's neck to rotate left and right (figure 2-2-10a and b).

neck pain

neck pain

Figure 2-2-10a and b supine drafting method

Eleven, by the head push shoulder method

[position]Client in supine position with head turned to the uninjured side. The healer rode up to the bed.

[methods]The doctor holds the patient's back pillow with one hand and presses his head with his forearm; Push the affected shoulder with the other hand, and use the opposite force with both hands. You can hear the bouncing sound of cervical vertebra (figure 2-2-11).

neck pain

Figure 2-2-11 pushing shoulder by head

Twelve, fork hand head neck method

[position]Patient supine, head neutral. The healer rode up to the bed.

[methods]The hands of doctor crosses fist, thumb holds up the vertebra after patient neck to go up, double forearm clip patient cheek ministry is pulled up, can rotate to right and left flabby patient ministry muscle, below head neutral position, doctor both hands sends force up, can hear the bouncing sound of cervical vertebra (figure 2-2-12a, b).

neck pain

neck pain

Figure 2-2-12a and b forklift neck

Thirteen, according to the neck head method

[position]Client in supine position with head turned to the uninjured side. The healer lunged before the bed.

[methods]The doctor presses the patient's ipsilateral (or contralateral) high and tender cervical transverse process or articular process with one thumb, and gently supports the patient's submaxillofacial region with the other four fingers; With the other hand, support the patient's head (slightly on the upper cervical vertebra, 30° on the middle cervical vertebra, and try to support the lower cervical vertebra), and then rotate forward and upward 45° to hear the bouncing sound of cervical vertebra (figure 2-2-13a, b).

neck pain

Figure 2-2-13a and b according to the method of neck turning head

Fourteen, push shoulder method

[position]Client in prone position with head turned to affected side. The healer lunged before the bed.

[methods]The surgeon holds the patient's jaw with one hand and presses his head with his forearm; Push the affected shoulder with the other hand, and use the opposite force with both hands. The bouncing sound of cervical vertebra can be heard (figure 2-2-14a and b).

neck pain

neck pain

Figure 2-2-14a, b push shoulder method in support of jaw

15, prone neck rotation method

[position]Client in prone position with head turned to affected side; The healer lunged before the bed.

[methods]The doctor held the patient's high and tender transverse process or articular process with one thumb, and gently supported the patient's occipital with the other four fingers; The other hand supports the patient's lower jaw and exerts force upward and backward. Meanwhile, the waist exerts force backward and upward rotation of the patient's head, and the bouncing sound of cervical vertebra can be heard (figure 2-2-15a and b).

neck pain

neck pain

The 2-2-15 a, b

There is lingering fragrance in the hand.

Editor in charge:

Leave a Reply

Your email address will not be published. Required fields are marked *

More Pain Releif Information

Bitnami